Strukturovaná kabeláž a kabeláž pro datová centra
Metz, MR-SM3 Modbus RTU
| Kód: | 11084113 |
- The module MR-SM3 is a smart meter component for building automation
- Current, voltage, power and many other values can be captured by three 230 Volt current circuits
- In addition, the device provides monitoring functions of for example asymmetry, phase failure, phase sequence, overvoltage and undervoltage
| Cena: | dostupná po přihlášení | ||
| Dostupnost: | Brno |
Praha |
na vyžádání |
| Množství: | ks |
|
|
- The module MR-SM3 is a smart meter component for building automation
- Current, voltage, power and many other values can be captured by three 230 Volt current circuits
- In addition, the device provides monitoring functions of for example asymmetry, phase failure, phase sequence, overvoltage and undervoltage
- These values can be queried via a Modbus-Master
- Module address, bit rate and parity are set with two rotary switches on the front or by software
- Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets
Technická specifikace
| Protocol | Modbus RTU |
| Address range | 00 to 99 |
| Bus interface | RS485 (two-wire bus) |
| Transmission rate | 1200 to 115200 Bit/s |
| Operating voltage | 24 V AC/DC ± 10% (SELV) |
| Current consumption | 108 mA (AC) / 50 mA (DC) |
| Relative duty cycle | 100 % |
| Inputs | 3 x analog |
| Input / voltage | 230 V AC -20 to +15 % |
| Input / voltage range | 184 to 265 V AC |
| Input / current | 0 to 16 A AC |
| Display | LED green, red |
| Dimensions W x H x D | 50 x 69.3 x 60 mm |
| Weight | 110 g |
| Operating temperature range | -5 °C to +55 °C |
| Storage temperature range | -20 °C to +70 °C |
| Ingress protection for housing / terminal blocks | IP40 / IP20 |
Originální text
- The module MR-SM3 is a smart meter component for building automation
- Current, voltage, power and many other values can be captured by three 230 Volt current circuits
- In addition, the device provides monitoring functions of for example asymmetry, phase failure, phase sequence, overvoltage and undervoltage
- These values can be queried via a Modbus-Master
- Module address, bit rate and parity are set with two rotary switches on the front or by software
- Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets