Strukturovaná kabeláž a kabeláž pro datová centra
Metz, MR-CI4 Modbus RTU
| Kód: | 1108401332 |
- The Modbus module with 4 analog inputs was developed for decentralized switching tasks
- It is suitable for detecting currents and voltages of, for example, active temperature sensors, electrical vent and mixing valves, valve positions, etc.
- Each input can be set as current or voltage input by DIP switches on the front
| Cena: | dostupná po přihlášení | ||
| Dostupnost: | Brno |
Praha |
na vyžádání |
| Množství: | ks |
|
|
- The Modbus module with 4 analog inputs was developed for decentralized switching tasks
- It is suitable for detecting currents and voltages of, for example, active temperature sensors, electrical vent and mixing valves, valve positions, etc.
- Each input can be set as current or voltage input by DIP switches on the front
- The inputs can be scanned with standard registers via a Modbus master
- The module address, the baud rate and the parity are set with two rotary switches on the front or by software
- Suitable for decentralized mounting on TH35 rails according to IEC 60715 in electrical distribution cabinets
Technická specifikace
| Protocol | Modbus RTU |
| Address range | 00 to 99 |
| Bus interface | RS485 (two-wire bus) |
| Transmission rate | 1200 to 115200 bit/s |
| Operating voltage | 24 V AC/DC ± 10% (SELV) |
| Current consumption | 25 mA (AC) / 10 mA (DC) |
| Relative duty cycle | 100 % |
| Inputs | 4 x analog |
| Input / voltage (U1-U4) | 0 V to 10 V DC |
| Input / resolution | 1 mV (0 to 100 %) |
| Input / error | 10 mV |
| Input / current (I1-I4) | 0 (4) to 20 mA DC |
| Input / resolution | 2 µA |
| Input / error | 20 µA |
| Display | Green, red LED |
| Dimensions (W x H x D) | 35 x 69.3 x 60 mm |
| Weight | 95 g |
| Operating temperature range | -5 °C to +55 °C |
| Storage temperature range | -20 °C to +70 °C |
| Ingress protection for housing / terminal blocks | IP40 / IP20 |
Originální text
- The Modbus module with 4 analog inputs was developed for decentralized switching tasks
- It is suitable for detecting currents and voltages of, for example, active temperature sensors, electrical vent and mixing valves, valve positions, etc.
- Each input can be set as current or voltage input by DIP switches on the front
- The inputs can be scanned with standard registers via a Modbus master
- The module address, the baud rate and the parity are set with two rotary switches on the front or by software
- Suitable for decentralized mounting on TH35 rails according to IEC 60715 in electrical distribution cabinets