Strukturovaná kabeláž a kabeláž pro datová centra
Power supply NG4 HS
| Kód: | 110561 |
- The NG4 HS power supply supplies a regulated direct voltage of 24 V DC / 16 W for supplying power to the respective devices of the product family of I/O components
- The secondary voltage can only be tapped at the right side of the device front at a pluggable terminal block and at the screw-type terminal blocks
| Cena: | dostupná po přihlášení | ||
| Dostupnost: | Brno |
Praha |
na vyžádání |
| Množství: | ks |
|
|
- The NG4 HS power supply supplies a regulated direct voltage of 24 V DC / 16 W for supplying power to the respective devices of the product family of I/O components
- The secondary voltage can only be tapped at the right side of the device front at a pluggable terminal block and at the screw-type terminal blocks
- The bus communication can be tapped on both sides of the device front
- A parallel operation of various power supply units is not allowed
- Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets
Technická specifikace
| Field of application | LON (LF-xxx), BACnet (BMT-xxx), Modbus (MR-xxx) |
| Input voltage range | 110 to 240 V AC, 50 / 60 Hz |
| Internal fuse, soldered fuse | T 1.0 A/250 V |
| Output / power | 16 W |
| Output / voltage | +24 V DC (SELV) |
| Output / current | 700 mA |
| Load and control accuracy | +/-3 % |
| Mains failure backup | smaller than 40 ms |
| Display | green LED |
| Dimensions (W x H x D) | 50 x 69.3 x 60 mm |
| Weight | 108 g |
| Operating temperature range | -5 °C to +55 °C |
| Storage temperature range | -20 °C to +70 °C |
| Ingress protection for housing / terminal block | IP40 / IP20 |
| Terminal blocks | |
| Wire cross section solid wire | max. AWG 12 (4.0 mm²) |
| Wire cross section stranded wire | max. AWG 14 (2.5 mm²) |
| Wire diameter | min 0.3 mm up to max. 2.7 mm |